Research · New Zealand

NZ research notes.

What we found about the New Zealand microcement market, the rules that apply to wet areas and slip, and the Queenstown climate. Public sources only, linked at the end. Where sources disagree, we say so. This is research, not building or legal advice.

The market

NZ microcement is sold mainly through a handful of distributors and installed by trained or certified applicators, rather than sold to the public. Suppliers describe the product as a multi-layer, hand-applied system that is not a DIY product, usually 2–4 mm thick, for walls, floors, wet areas and benchtops. 2, 5, 8, 10 There are installers in Queenstown, Wānaka and Central Otago who work with at least one of these systems, according to the Forcrete installer directory; we have no connection with them. 4

Brands and suppliers found

Brand or systemNZ distributorWhat the source saysSource
Mapei Ultratop LoftMBP (NZ) Ltd, exclusive Mapei distributor (Auckland and Christchurch offices)Decorative microcement for floors, walls, stairs and furniture elements1
Cemher, Novacolor Wall2FloorThe Finish (showrooms in Parnell, Auckland and Tauriko, Tauranga)Exclusive NZ distributor; 3–4 mm; wet areas, floors, walls, benchtops; suitable for underfloor heating; certified applicators and a 10-year warranty are stated2
ForcreteForcrete New Zealand (Mount Maunganui)Certified applicator network across NZ; describes its system as waterproof before sealers (manufacturer claim)3
Microtopping (Ideal Work)Artemani Studio2–3 mm; walls and floors; supplier states suitable for wet areas, interior only5
TechSol (Spain)Microcement New ZealandOfficial NZ distributor; lists NZ$320 + GST per 15 kg tub (materials only); says it cannot go over timber floors6
TopcretTopcret New Zealand (listed as a licensee)Licensed-partner network; New Zealand is listed7
Luxury ConcreteLuxury Concrete NZDescribes a six-stage system; states microcement is not a substitute for required waterproofing8

Statements are the suppliers’ own claims, quoted for research. They are not endorsements and have not been independently verified.

Pricing

No reliable Queenstown or floor pricing was found. The only published NZ ranges we found were for Auckland interior walls, indicative for 2026 and including GST: about NZ$215–$280 per m² for polished, concrete-look plaster, from about NZ$120–$180 per m² for lighter textured finishes, with a minimum job of about NZ$1,500. Floors, bathrooms and wet areas are quoted individually. 9 A distributor lists materials at NZ$320 + GST per 15 kg tub. 6 These numbers are for orientation only, and the first is a plasterer’s blog rather than a price list.

Building Code E3 Internal moisture, wet areas

  • Clause E3 requires floor surfaces in spaces with sanitary fixtures, and wall surfaces adjacent to them, to be impervious and easily cleaned. 12, 13
  • E3/AS1 lists three wet-area floor finishes: sheet vinyl (integrally waterproof, sealed joints), ceramic or stone tiles with maximum 6% water absorption on a continuous impervious substrate or membrane, and a slab-on-grade concrete floor with a steel-trowelled or polished finish. 11
  • Other finishes are outside the Acceptable Solution and must be designed and consented as an Alternative Solution. 11 Microcement is not one of the three, so a microcement wet-area floor is an Alternative Solution.
  • For tiled showers, E3/AS1 points include impervious floor and wall finishes, a floor fall of at least 1:50 within 1.5 m of the shower rose, and enclosures at least 1.8 m high and 300 mm above the shower rose. Waterproofing systems under tiles need at least 15 years’ durability (Clause B2). 12
  • One NZ supplier states that microcement and its sealer should not be treated as a substitute for the waterproofing system where New Zealand building requirements call for one. 8

Slip resistance (Clause D1, AS 4586)

  • Slip resistance is tested to AS 4586:2013; the wet pendulum test gives P classes. P3 is a slip resistance value (SRV) of 35–44, P4 is 45–54 and P5 is over 54. 15, 16
  • D1/AS1 applies to access routes. For level routes that become wet, it requires an SRV of at least 39 (AS 4586 Appendix A, Slider 96), or a material listed in D1/AS1 Table 2. 14
  • In housing, internal floors, including bathrooms and kitchens, are generally treated as dry under D1/AS1. There is no statutory slip requirement for other floor areas. 14, 16
  • As good practice, BRANZ suggests an SRV of 39 (or coefficient of friction 0.4) in bathrooms, showers, laundries, kitchens, decks and pool surrounds. 14
  • A microcement’s result depends on the whole system including the sealer, so ask for a test report for the exact system.

Queenstown climate

  • Queenstown station (329 m): mean annual temperature 10.7 °C, 107 ground-frost days a year, lowest recorded −8.4 °C, 1,921 sunshine hours. These are NIWA means for 1971–2000, so they are dated; the extreme is for the full historical record. 17
  • Snow falls on about 12 days a year at Queenstown station, though it rarely settles for more than a day or two at that elevation. 18
  • The Queenstown-Lakes district is in NZ Building Code H1 climate zone 6, the coldest. 19, 20 (We do not quote R-values because the secondary sources disagree.)

Underfloor heating and frost

These notes come from installers in the UK and Ireland, not from NZ manufacturers. They are general industry guidance. The specific system’s data sheet and warranty always take priority.

  • Microcement is described as compatible with both water (hydronic) and electric underfloor heating, if the substrate is cured, crack-free and moisture-tested, and the system includes fibreglass mesh. 21
  • One UK installer recommends commissioning the heating before the microcement goes on, applying the microcement with the heating off, waiting at least 14 days after the final sealer before turning the heating back on, then raising the temperature by no more than 5 °C a day. 21 We have not used those numbers in the site copy because they are one installer’s view.
  • Exterior microcement in cold climates requires a manufacturer-specified exterior system, with frost- and UV-resistant sealers. One UK installer says an interior system used outdoors can fail within a couple of winters. 22

Place facts used

  • Lake Wakatipu is about 80 km long, with a surface at roughly 309 m above sea level. Sources vary on its maximum depth, so we do not quote one. 23
  • The Remarkables are formed of schist and greywacke. Sources disagree about the exact height and which peak is the highest (2,319 m is quoted for both Single Cone and Double Cone), so we use “about 2,300 m”. 24
  • Gold was found in the Arrow River in August 1862 and Arrowtown’s main street sits at about 410 m. St John’s Church (1873) is built of local schist. 25
  • Crown Range Road reaches 1,076 m at its summit. 26 Ben Lomond’s summit is 1,748 m. 27

Sources

  1. 1Mapei NZ: decorative microcement (Ultratop Loft), and MBP (NZ) Ltd, exclusive Mapei distributor
  2. 2The Finish: Microcement New Zealand (Cemher and Novacolor Wall2Floor)
  3. 3Forcrete New Zealand: home page
  4. 4Forcrete New Zealand: find an installer (regional directory)
  5. 5Artemani Studio: Microtopping by Ideal Work
  6. 6Microcement New Zealand: TechSol microcement and Venetian plaster
  7. 7Topcret: licensed partners (New Zealand is listed)
  8. 8Luxury Concrete NZ: microcement
  9. 9Key Painting (Auckland): What microcement and concrete-look walls cost, indicative 2026 ranges
  10. 10Claddagh Plastering: microcement FAQ (install time, cure time)
  11. 11BRANZ: E3/AS1 and wet area flooring
  12. 12BRANZ: Waterproofing tiled showers (E3/AS1 shower points, B2 durability)
  13. 13Building CodeHub (MBIE): Acceptable Solution E3/AS1 Internal moisture
  14. 14BRANZ bulletin: Slip resistance of floors (D1, AS 4586)
  15. 15Building CodeHub (MBIE): AS 4586:2013 Slip resistance classification of new pedestrian surface materials
  16. 16Atelier Ceramics (NZ tile supplier): P ratings, R ratings and Clause D1 (secondary summary)
  17. 17NIWA: Summary climate information for selected New Zealand locations (1971–2000 means)
  18. 18NIWA: The Climate and Weather of Otago (2021), Table 20, days with snow
  19. 19MBIE: Acceptable Solution H1/AS1 Energy efficiency, sixth edition
  20. 20Toolie: H1 climate zones NZ (secondary summary; Queenstown-Lakes in zone 6)
  21. 21Microcement Finishes (UK installer): Microcement and underfloor heating
  22. 22The Venetian Plaster Company (UK): Microcement pools and exteriors
  23. 23Wikipedia: Lake Wakatipu
  24. 24Wikipedia: The Remarkables
  25. 25Wikipedia: Arrowtown
  26. 26Te Ara: Crown Range road summit
  27. 27Department of Conservation: Ben Lomond Track

Questions about the research?

If something here looks wrong, or you have a question about a source, get in touch.

Request a quote